---
title: New SIP Call Controls Now Available in Mission Control | Telnyx
canonical: https://telnyx.com/release-notes/mission-control-sip-updates
---
# New SIP Call Controls Now Available in Mission Control | Telnyx

[View as page](https://telnyx.com/release-notes/mission-control-sip-updates)

[Release notes](https://telnyx.com/release-notes)

# New SIP Trunk Settings Now Available in Portal

### 19, Nov 2026

Mission control portal now gives SIP operators more visibility and control: check registration status on every connection, include hold time in recordings, confirm blind transfers, pick the caller ID a transfer destination sees, keep far ends from dropping on comfort-noise hold, investigate calls with AI troubleshooting, and look up inbound caller names with enhanced CNAM.

### What's new

* **SIP registration status:** The SIP Connections list shows whether each credential or SIP Attach (UAC) connection is registered, with the same data available from the SIP Registration Status API.
* **Continue recording on hold:** Include hold time in call recordings for inbound calls and outbound calls.
* **Confirm blind transfer:** Keep the original call up while the destination rings, and release the transferring party only when the destination answers.
* **Caller ID for transfer target:** Choose whether the transferee's or the transferor's number is presented to the transfer destination on SIP REFER transfers.
* **Generate RTP on comfort-noise packets :** Send silent RTP during comfort-noise gaps so far-end PBXs don't drop calls on hold.
* **AI troubleshooting in the SIP call debugger:** Get an AI-generated summary and timeline for a call, then ask follow-up questions in plain English.
* **Enhanced inbound CNAM:** Look up caller names for more US calling numbers, including names longer than 15 characters.

### Why it matters

SIP Trunking problems are quiet until they're expensive. A dead registration looks like a one-way-audio ticket. A transfer that rings into voicemail looks like a customer who hung up. And root-causing a bad call means replaying packet captures by hand. These controls put registration state, transfer behavior, hold media, and first-pass call analysis directly in Mission Control, so a telephony admin can answer "what happened on that call?" in minutes instead of through escalations.

### Example use cases

* Telephony admins verify a PBX migration actually registered before switching over call routing.
* Support engineers investigate dropped calls, missing audio, and call quality with an AI summary instead of parsing SIP traces.
* Compliance-heavy callers like finance and healthcare teams keep hold time in recordings for audit completeness.
* Support desks control which number a transfer destination sees, so customer callbacks reach the right team.

### Getting started

1. Check registration in Mission Control under Voice → SIP Trunking → SIP Connections.
2. Record on hold: Voice → Services → Call Recording (inbound) or your Outbound Voice Profile → Configuration (outbound), then select Continue recording on hold.
3. Configure transfers: open your SIP connection → Configuration → Advanced → Confirm blind transfer and Caller ID for Transfer Target.
4. Troubleshoot a call: Debugging → SIP Call Flow Tool → open Call Data Debugging → Flow tab → AI troubleshooting.
5. Enable Enhanced CNAM: Numbers → My Numbers → edit the receiving number → Voice → Services → Inbound caller name lookup → Enhanced.

Enable the connection-level settings with the API:

curl -X PATCH \
  --header "Authorization: Bearer $TELNYX_API_KEY" \
  --header "Content-Type: application/json" \
  https://api.telnyx.com/v2/credential_connections/{connection_id} \
  -d '{
    "bridge_generate_comfort_noise_on_cn": true,
    "transfer_caller_id": "from-transferor"
  }'

Check registration from the API:

curl --header "Authorization: Bearer $TELNYX_API_KEY" \
  "https://api.telnyx.com/v2/sip_registration_status?credential_type=sip_credential_connection&username=your_sip_username"

**Support articles**

* [SIP registration](https://support.telnyx.com/en/articles/4363904-sip-registration)
* [Call recording](https://support.telnyx.com/en/articles/5377454-call-recording)
* [Configure blind transfer confirmation](https://support.telnyx.com/en/articles/2026102801-configure-blind-transfer-confirmation)
* [Choose caller ID for SIP call transfers](https://support.telnyx.com/en/articles/2026110401-choose-caller-id-for-sip-call-transfers)
* [How external call transfers work](https://support.telnyx.com/en/articles/13117410-how-external-call-transfers-work)
* [Call hold, comfort noise, and RTP stream generation](https://support.telnyx.com/en/articles/2026092501-call-hold-comfort-noise-and-rtp-stream-generation)
* [Telnyx Debugging Tools](https://support.telnyx.com/en/articles/4304872-telnyx-debugging-tools)
* [Set up Inbound Caller ID Name (incoming)](https://support.telnyx.com/en/articles/1130656-set-up-inbound-caller-id-name-incoming)

[Start building](https://telnyx.com/sign-up)
